Tuesday, November 25, 2014

Faux Leather Skirt with a Renfrew Top


I bought some Vegan leather from Girl Charlee to see what I could do with a leather skirt for myself.  I don't own one, so I'm not exactly sure how they should fit.  I looked online at images to try to figure out what kind of pattern I wanted to work with.  I decided that Vogue 1247 would give me some nice seam lines.  I made this skirt before in a soft denim, which you can see here.  That post was about the time I was really enjoying having hair again!  If anyone is wanting to see/know how long it takes hair to grow back in after chemo, my blog definitely gives a good reference.  I can remember searching on Google how long does it take hair to grow back in.  


 Anyway, back to my skirt.  I didn't find the fabric too difficult to sew, but I did use my non-stick teflon foot.  My machine wouldn't move the fabric without it.




I put in an exposed zipper for the first time.  It looks pretty good to me.  I don't think I'll do that again--one skirt with an exposed zip is enough for me.  I have seen so many on other blogs that they grew on me.  I found an online tutorial on Craftsy, which made it fairly easy to do.  Honestly, I wasn't sure what type of zipper method would be best for this fabric.  If I make this skirt again, I will try an invisible zipper.


I carefully pressed my seams open with a pressing cloth on low heat and then top stitched them down.  That went well except for the vertical seam in the back (below the zipper).  I had to adjust my presser foot to almost nothing so it would glide easily over the fabric without pushing it too hard, creating little ripples.  I even tried putting interfacing there, but that didn't help at all.


I left off the front in-seam pockets.

One thing that helped greatly was Farbenmix Stylefix double-sided tape.  I used this to hold the hem in place, as well as holding the waistband seam together for top stitching.  I bought some fabric glue, but it didn't work.  Maybe it was the kind I used.  I limited how and where I stuck pins.


This is the first time I made the Renfrew with the cowl neck.  I've reviewed the Renfrew before and there are tons of reviews out there--it's a great staple pattern to own.

I'm thinking I will wear this to my husband's Christmas party this year.

Thanks for stopping by ~ Shirley


Friday, November 21, 2014

Minecraft Creeper Dress

Ottobre 6/2012 #30
Sulka Dress
Size 134
Fabric:  Ponte de Roma Knit, purchased from Girl Charlee


It all started with, "Momma, when can you make me a winter dress?  Oh, and I'd like it to have a creeper face on it too, please."  So, here is a Minecraft Creeper dress as requested by one of my girls.  A while ago I made my son a Minecraft jacket here.




I made the Sulka dress before, but this time I omitted the outer bodice piece since I was not going to be making any kind of bows.  However, I did cut the inner bodice piece out twice so I could use one as a lining to cover the applique stitches.  I had a great thought (later) that I could have also cut out the back bodice piece twice, totally enclosing the gathered waist seam.  Next time I make this dress, I will do that.

When placing the bodice and gathered skirt piece right sides together, you could take that extra bodice piece, putting it right side to wrong side on the skirt piece and then flip up the bodice pieces and baste the two together.  


I used black cotton lycra knit for the applique and neckband.  Hems and neckband top stitching with black thread.

Also, any of you who gather with elastic, is there a method to this that I am missing?  I did it, but not without repeated effort and frustration.  I seem to pull the elastic out from my needle at the beginning even though I run a couple stitches through it, run off my elastic when sewing....you get the picture.  I struggle with this.  Any advice is greatly appreciated.

I was curious how a ponte de roma knit would work with this pattern.  It is heavy, but it makes a nice winter-wear dress.  This knit is very soft too and easy to hem.  I did cut 1 inch pieces of interfacing (woven) to make my hemming easier.  It makes turning up your hem quick too because you don't have to measure it around since your have already cut your interfacing to the depth of the needed hem.

My daughter has already put in a request for a Tardis dress--my little Dr. Who fan.  I asked, "what makes you think I can just make these theme-type dresses?"  She says, "because you can."  I wish I had grown up with my very own tailor...ha ha.

Thanks for stopping by~ Shirley

Wednesday, November 19, 2014

Vogue 1411 with Butterick 5925


B5925
Version A
Size Small
Fabric:  Patchwork print jersey from Girl Charlee


I really like the way this top turned out.  I think this fabric would make nearly any pattern top appealing, even a simple t-shirt.

There is an interesting design feature--a little twist in the neckband and pocket band, which is made by offsetting marks that you match up on the pattern pieces.

The pockets are made by basting it first to the side piece which is then sewn to the shirt lower side seams.  At the top of the side piece, it gradually tapers in to a very narrow seam with the bottom being very wide .  Then you attach the sleeves, sewing down the arm edge, continuing down the side of the shirt till you meet up with the top of the side piece.  This matched up really well.


This shirt takes 2 yards of fabric up to a size large.  There are 7 pattern pieces!!

You can mix this up by combining coordinating fabrics.


V1411
Version A
Size A
Fabric:  Ponte de roma knit from Girl Charlee

 


Hmmm.  I'm not sure if I like the pants much.  They are just okay to me.  My husband and children like them.  I modeled them for my family before hemming to see if I should continue...ha ha.  Do you ever do that?  They fit well and have a unique design.  Maybe it is because there was a lot of work in putting these together that I just don't feel that the time spent met my style expectation.  The whole time sewing them I kept thinking to myself, "I don't know."  I will wear them though.  If I invest the time and it fits I will wear it.  Maybe not as often as other favorites.  I kind of wish I had just made my Ottobre legging pattern.  It is simple but I love it.  Oh well.  I'm trying to make sure I don't just have 10 of the same thing in my closet.




On to my technical thoughts about the pattern.  You really have to sit down with these and make sure you get everything matched up correctly before sewing.  Seams have to be sewn, pressed open flat, and then topstitched while straddling the seam.  I used a twin stretch needle size 2.5.  Hindsight I wish I had used a wider needle.  I think it kind of made it pucker a little, raising this seam a bit.  However, the seams do stand out more and that is what makes this pant pattern unique from others.  I didn't shorten these and I'm 5'1, so if you make them, you might want to add some length to them!  I almost wish they were longer on me.  I am petite but I always like to wear my pants a little on the long side since most times I wear boots with chunky heels.  Using such a narrow size twin needle could have contributed to losing a little on the length since my seams pulled up a bit (does that make sense?)

Simple waistband with elastic.

That actual fit is good.  They are supposed to fit snug.  I made the straight leg version instead of the tapered leg.  Since they are shorter than I had anticipated, I don't know if they look too short with these ankle boots or not.  Maybe I should try tucking them into a different style boot.

Size A requires 1 1/4 yards of fabric. There are 8 pattern pieces!!



Thanks for stopping by ~ Shirley




Wednesday, November 12, 2014

Jalie Bra 3131


Bra Review, Jalie 3131
Band size R
Cup size V

This is a great bra!

You might remember this fabric; I used it for an Ottobre skirt I made recently.  It takes so little fabric to make a bra!  I am quite pleased with my results.  This is my second attempt.  Last week I made a muslin and the band size was perfect, but my cups were a little on the small size.  I'm not sure why, but I'm wondering if it is due to my recent reconstruction surgery with implants.  Things still need to settle in (I think).  This time I went up 2 sizes and I'm pretty happy with the fit.  I can definitely use less bra strapping since I have to tighten them up almost all the way.  I have to do that with any store bought bra.  Also, I need to make the armhole FOE piece shorter by about 1/2 inch so it will pull that curve a little snugger in around me.  With those adjustments, the fit will be perfect for me.

 The band stays put where it should across my back, so taking that under bust measurement to determine band size is precise.  There isn't anything very technical to the construction.  If you haven't sewn with fold over elastic, you might want to practice a little with that first.  

My only recommendation is for you to cut your suggested cup size out of scrap fabric, gather it at the bottom and try it out for size.  It won't be exact this way, but you should be able to get a good idea if the size is right for you.

Jalie has a tutorial online; take a look at it and you will be amazed at how simple this bra goes together.  I watched it a few times while I was waiting for my pattern to come in the mail.

I tried to photograph this on my body form, but I wasn't able to get it adjusted where it looked right.  As far as support, I am probably not the best one to say since with implants, I'm not really going anywhere. LOL   However, the way this bra is constructed and lined, it feels pretty sturdy and secure.  It is definitely worth a try if you are interested!

I purchased all my supplies from Sew Sassy.

Thanks for stopping by~Shirley

Tuesday, November 4, 2014

My Lounging Outfit

True Bias Hudson Pant, Size 2
Renfrew Top, Size 6



 Ahhh, it is so nice to have comfy lounge pants to wear!  If you are looking for a easy sew and quick gratification project, this is the pattern to have.  I am amazed at how well drafted and fitting these pants are.  I used a thermal knit I had in my stash; I purchased it so long ago that I can't remember from where. For the pocket trim, waistband, and ankle pieces, I used navy blue ribbing.  For the inner pocket and lining pieces, I used the same thermal knit fabric as the pants.



I did not have 2 inch elastic for the waist.  Instead, I used some 1 and 1/4 inch that I had on hand. The instructions have you sew 2 lines of stitching for a casing for the drawstring, which is sewn through the elastic.  I just didn't like the looks of it and picked my stitches out (that was fun).  It was probably my error...a combination of wrong size elastic and sewing too quickly.  This started out just as a muslin, so I was throwing it together rather haphazardly.  However, I really started liking the thermal dot with the navy blue ribbing, so I decided to unpick my poorly sewn casing and leave the waistband as is.  I made a drawstring out of the thermal knit.  I cut a good length of fabric by 2 inches and sewed up one side and turned it right side out and knotted the ends.  I made sure to cut the fabric in the direction of least amount of stretch.



I won't be wearing these out of the house since the white thermal knit is a little bit on the sheer side if the light catches it just right.



For my Renfrew top, I cut out a size 6 this time since I wanted a more roomy fit and feel to it.  The fabric is a stretch rayon jersey knit, which is very stretchy and drapey.  The neckband isn't as tight due to this, but I'm okay with that since this is just for the purpose of a pajama.  I purchased this knit from Fabric.com.  I used most of it on leggings and had only an odd-shaped remnant left, so it was a tight squeeze getting it cut out, but thankfully it worked.



I am already cutting out a second pair of pants--I like them that much!  It is rare that I turn around and make the same thing immediately.  I will get some 2 inch elastic though and see if I can get the waistband right next time.  However, I am totally happy with the looks of an unstitched waistband too!  No one is going to see it and I rarely ever tuck my shirts in or wear a shirt that short in length where the top of the pant is seen.



On a personal note, I had my stitches removed yesterday from the 2nd phase of my breast reconstruction surgery!  I'm still a work in progress.  Apparently radiation can tighten up the skin, so the left side is not wanting to cooperate as much.  It's really grabbing on and holding that implant in. My surgeon will do a little more with it during the next surgery, which is in January.  I'm getting there!!  I ordered the Jalie bra pattern to make some nice, simple cotton knit bras.  So, I'm excitedly waiting on my pattern which should be arriving in the mail any day.  I ordered my bra-making supplies from Sew Sassy.

Thanks for stopping by ~ Shirley